Hobkirk Sewing Machines Ltd

Husqvarna Accessories Category 7

The following accessories will fit the following machines, unless otherwise stated.

Models: Designer Diamond, Designer SE, Topaz 30, Topaz 20, Designer I, Designer II, Quilt Designer, Quilt Designer II, Sapphire 875 Quilt, 870, 855, 850, 835 and 830.

Husqvarna Bobbin - (Cat. 5, 6 and 7, Not Emerald) (Pack of 10)

Part number: 4131825-45
Bobbin for category 5, 6 and 7 machines, but not Emerald Series
  • £8.80

Husqvarna Bobbin for Emerald Series Only (Pack of 10)

Part number: BLB212
Pack of 10 Bobbins for Husqvarna Emerald Series only
  • £6.00

Husqvarna Bobbin - For Designer EPIC (Pack of 8)

Part number: 920434096
Bobbin for Husqvarna Designer EPIC
  • £12.40

Husqvarna 2mm Shell Hem Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4118524-45
Stitch a rolled hem in sheer and very lightweight fabrics for evening wear, lingerie, scarves.
  • £18.70

Husqvarna Clear Seam Guide Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4130348-45
Guides your edge stitching when joining the fabric. Keeps the seam allowances at the same distance from the edge through the project
  • £12.64

Husqvarna Edging Foot J (Cat 1, 2, 3, 4, 5, 6, and 7)

Part number: 4123806-45
The J Foot is used for stitches that stitch to the side and can pucker or curl the fabric. The tiny wire on the edge of the foot prevents the curling of the fabric edge
  • £20.57

Husqvarna Adjustable Blind Hem Foot (Cat. 1, 2, 3, 4, 5, 6, and 7)

Part number: 4129766-45
The Adjustable Blind Hem Foot can be moved from side to side to fine tune the amount of fabric caught by the blind hem stitch
  • £12.64

Husqvarna Roller Foot (Cat. 1, 2, 3, 4, 5, 6, and 7)

Part number: 4129902-45
Roller Foot sews fabrics with uneven levels, leathers, velvets, and fabric with nap or loops
  • £20.57

Husqvarna Non-stick Glide Foot H (Cat. 1, 2, 3, 4, 5, 6, and 7)

Part number: 4127961-45
When sewing foam, plastic, plastic coated fabrics, leather and imitation leathers, the Non-stick Glide Foot H feeds over the fabric without sticking
  • £15.59

Husqvarna Sensor One-Step Buttonhole Foot (Cat. 1, 6 and 7)

Part number: 4128151-02
The Buttonhole Sensor Foot is used for fully automatic buttonhole sewing. Not for 400 series and 350, or Emerald series
  • £50.60

Husqvarna Adjustable Buttonhole Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4126792-45
The buttonhole foot has a slide that is adjustable for different sizes of buttons to make several buttonhole the same size
  • £18.70

Husqvarna Narrow Zip Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4125657-45
Snap on the narrow zip foot to stitch extra close to zipper teeth, snaps, snap tape, beads, etc.
  • £18.70

Husqvarna Button Foot & Placement Tool (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129345-45
This presser foot for sewing on buttons raises the button slightly off the fabric to give a slight thread shank to enable easy buttoning
  • £25.18

Husqvarna Left Edge Top Stitch Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4127842-45
The Left Edge Top Stitch Foot guides your top stitching and edge stitching perfectly
  • £18.70

Husqvarna Gathering Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4127971-45
Gather fabric or gather and attach a ruffle in one step. Suitable for light to medium weight fabrics.
  • £18.70

Husqvarna Elastic Guide Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4128153-45
The Elastic Foot guides and stretches 6 to 12 mm wide elastic as it is sewn in place. Use it for action wear, lingerie, and other elastic insertion techniques
  • £25.18

Husqvarna Edge Joining Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4127968-45
Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together.
  • £18.70

Husqvarna Edge Stitching Foot (Cat. 1, 2, 3, 4, 5, 6, and 7)

Part number: 4127967-45
The edge stitching foot guides topstitching and edge stitching perfectly
  • £18.70

Husqvarna Double Welt Cord Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4126271-45
The Double Welt Cord Foot is used to make trim, to cover raw edges, or as a decorative touch on pillows, cushions and other home accessories.
  • £18.70

Husqvarna 10mm Hemmer (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4120176-45
Rolls a 10mm double hem in light to medium fabrics. Not for Designer, Sapphire, Opal Series, Eden Rose 250M and Tribute 140M Machines.
  • £22.00

Husqvarna 1/2" (12mm) Bias Binder (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129887-01
To bind edges with 1/2" (12mm) bias binding
  • £34.10

Husqvarna Adjustable Bias Binder (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129850-45
Make beautiful edge finishes with your favorite bias tape. Adjustable to fit bias tapes in different widths, from 1/4" (6mm) to 3/4" (20mm). Not for Emerald Series.
  • £25.30

Husqvarna Piping Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4118510-45
Insert packaged piping into seams and edges for a tailored finish. Cover cord with fabric for specialty piping.
  • £18.70

Husqvarna Clear Piping Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4130971-45
Insert packaged piping into seams and edges for a tailored finish.
  • £12.64

Husqvarna 1/4" (6mm) Bias Binder (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129895-45
Bind edges with 1/4" (6 mm) Bias Binding.
  • £25.18

Husqvarna 2mm Narrow Hem Foot (Cat. 1. 2. 3. 4. 5. 6 and 7)

Part number: 4118522-45
Stitch a narrow hem in very lightweight fabrics such as silk scarves, batiste napkins, shirt hems, ruffles and lingerie. Straight stitch length 2
  • £18.70

Husqvarna Narrow Braid/Cord Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4118509-45
Couch or stitch yarn and narrow braids and trims to embellish garments, gifts and crafts. Not for Emerald 116, 118 and 122
  • £18.70

Husqvarna Gimping Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4125805-45
Use the Gimping Foot to create a dimensional satin stitch technique. Not for Emerald 116, 118 and 122.
  • £18.70

Husqvarna Clear 2-3mm Embellishment Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4130304-45
Embellish your work with small pearls.
  • £12.64

Husqvarna Join and Fold Edging Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4132488-45
Use the Join and Fold Edging Foot together with different types of edging, such as lace, embroidered trims or various fabrics, along with the beautiful HUSQVARNA VIKING® stitches to create beautiful edgings.
  • £12.64

Husqvarna Mini Bead Foot 4mm (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4127011-45
Stitch 4mm beads and pearls to edges or couch onto garments, quilts or crafts. Not for Emerald series.
  • £12.64

Husqvarna Chenille Stitching Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129752-45
Make it easy to embellish beautiful chenille effects. For beginners as well as experienced quilters and sewres.
  • £18.70

Husqvarna Fancy Trim Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4128238-45
Decorate your project with glittery sequins by using the Fancy Trim Foot. Not for Emerald 116, 118 and 122.
  • £12.64

Husqvarna Clear Invisible Zip Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4132865-45
As the name implies, the zipper is hidden in a seam, becoming virtually invisible. This zipper application is often thought of as very difficult to do, however it’s really one of the easiest.
  • £20.57

Husqvarna Transparent Foot B (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4131138-45
Because it is clear and has red guidelines, visibility and accuracy is improved.
  • £13.92

Husqvarna Clear B Edge Stitching Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4130583-45
The tunnel on the bottom of the foot allows stitches to form perfectly and feed flawlessly
  • £12.64

Husqvarna Clear B Edge/Joining Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4130584-45
The Clear B Edge/Joining Foot guides decorative stitches over a seam, or marked line
  • £12.64

Husqvarna Candlewicking Foot (Cat. 1, 6 and 7)

Part number: 4125108-45
The Candlewicking Foot has a deep tunnel on the underside to feed over a built up stitching
  • £18.70

Husqvarna Marking Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4118503-45
Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Not for Emerald 116, 118 or 112.
  • £18.70

Husqvarna 3 Groove Pin Tuck Foot with Raised Seam Plate (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4128456-45
Sew quick tucks in medium weight fabrics. Use with twin needle. Not for Emerald series
  • £18.70

Husqvarna Edge/Quilting Guide (Cat. 5, 6 and 7)

Part number: 4126019-45
The Edge/Quilting Guide is used for wide seam allowances, pintucks, topstitching, or channel quilting
  • £13.92

Husqvarna 5 Groove Pin Tuck Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4123699-45
Sew quick tucks in light to medium fabrics
  • £18.70

Husqvarna 7 Groove Pin Tuck Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4123628-45
Sew quick tucks in light weight fabrics
  • £18.70

Husqvarna 9 Groove Pin Tuck Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4123700-45
Sew quick tucks in very light weight fabrics
  • £18.70

Husqvarna Quilters 1/4" Piecing Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4127855-45
Sew a scant 1/4" seam allowance. Red lines mark 1/4" and 1/8" pivot points in front of and behind the needle
  • £18.70

Husqvarna Clear 1/4" Piecing Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129274-47
For clear visibility when 1/4" (6mm) and 1/8" (3mm) seams with straight stitch are desired
  • £15.60

Husqvarna Clear 1/4" Piecing Foot with Guide (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129274-45
For straight stitch and hand look quilting stitches. Guide will help you keep the 1/4" (6mm) distance.
  • £12.64

Husqvarna Clear Stitch-in-Ditch Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4129274-46
For excellent visibility, and ease of use, when stitching in the ditch. Stitching in the ditch means stitching in the finished seam of a quilt or binding.
  • £12.64

Husqvarna Open Toe Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4128009-45
Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel on the underside of the foot feeds smoothly over the stitches and the open front gives greater visibility for accuracy.
  • £18.70

Husqvarna Clear Open Toe Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4130319-45
Sew taper stitches and decorative stitches. The clear view through the foot makes it easy to match rows of stitches perfectly.
  • £12.64

Husqvarna Clear Open Toe Foot Free-Motion (Cat. 1 and 7)

Part number: 4128606-45
The Clear Open Toe Free-Motion foot is ideal for stitching free motion on print fabrics, or when stippling around pieced or embroidered designs.
  • £13.92

Husqvarna Free-Motion Guide Grip (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4125388-45
Place on quilt for free-motion quilting and embroidery. No need to hoop the fabric.
  • £29.50

Husqvarna Free-Motion Guide Foot (Floating) (Cat. 7)

Part number: 4125764-45
The large transparent plate is marked with 1/4" and 1/8" guidelines for excellent visibility and accuracy when free-motion quilting and embroidering.
  • £25.30

Husqvarna Open Toe Stippling Foot (Floating) (Cat. 7)

Part number: 4128010-45
The Open Toe Stippling Foot gives clear visibility when doing free-motion quilting and embroidery.
  • £18.70

Husqvarna Open Toe Free-Motion Spring Foot (Cat. 5, 6 and 7)

Part number: 4130376-46
The Open Toe Stippling Foot gives clear visibility when doing free-motion quilting and embroidery. Not for Emerald Series.
  • £29.98

Husqvarna Midsize Embroidery Hoop 6-3/4" x 4" (170 x 100mm)

Part number: 4126655-01
Midsize Embroidery Hoop 6-3/4" x 4" (170 x 100mm)
  • £66.00

Husqvarna Standard Embroidery Hoop 4" x 4" (100 x 100mm)

Part number: 4125274-01
Standard Embroidery Hoop 4" x 4" (100 x 100mm)
  • £30.80

Husqvarna Mini Spring Embroidery Hoop 1.6" x 1.6" (40 x 40mm)

Part number: 4125739-01
Mini Spring Embroidery Hoop 1.6" x 1.6" (40 x 40mm)
  • £39.60

Husqvarna Hoop Ease 6-3/4" x 4" (170 x 100mm)

Part number: 4127495-02
Hoop Ease is a fiber stabiliser with the center cut out to eliminate stabiliser under the design area.
  • £8.00

Husqvarna Hoop Grip

Part number: 4127386-45
Holds your embroidery hoop secure for easy positioning and hooping of your fabric or garment.
  • £57.20

Husqvarna Sensor Q Foot (Cat. 7)

Part number: 4131920-45
The Sensor Q Foot is used for embroidery and free motion sewing, quilting and embroidery on specially thick or spongy fabrics.
  • £18.70

Husqvarna Flat Felled Foot 9mm (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4131855-45
9 mm Flat-felled seams such as the typical jeans seams, are extremely durable and popular. 9 mm flat-felled seams are often used in home dec items.
  • £25.30

Husqvarna Interchangeable Dual Feed Foot (Cat. 5, 6 and 7)

Part number: 9202190-96
The Dual Feed Foot with changeable presser feet is designed to feed layers of fabric and/or batting evenly. Not for Emerald Series.
  • £82.12

Husqvarna Accessory Ankle (Cat. 5, 6 and 7)

Part number: 4126161-45
Accessory Ankle
  • £10.08

Husqvarna 3mm Shell Hem Foot (Cat. 1, 2, 3, 4, 5, 6 and 7)

Part number: 4118520-45
Stitch a rolled hem in sheer and very lightweight fabrics for evening wear, lingerie, scarves.
  • £18.70

Husqvarna Yarn Couching Foot (Cat. 7)

Part number: 9202150-96
With the Yarn Couching Feet Set you can easily create decorative yarn embellishment both when sewing free-motion and embroidering.
  • £30.80
Web design by Brick technology Ltd.