Hobkirk Sewing Machines Ltd

Pfaff Free-Motion­/Darning Foot

Pfaff Free-Motion/Darning Foot

Pfaff free motion darning foot

Part number: 413039601
£19.17 + VAT
Free delivery on all orders over £30.00(UK Mainland Only) unless otherwise stated


The Free-motion­/Darning Foot is perfect for sewing free-motion embroidery or darning.


  1.  Make sure the needle is at its highest position.
  2.  Attach the Darning Foot: with your thumb and finger, squeezing the front and back of the foot together. Insert the pin of the Darning Foot as far as it will go into the hole at the back of the presser foot holder.
  3.  The “C-shaped” Guide should be positioned around the presser bar. The long arm must be behind the needle clamp. Tighten the screw.
  4.  Lower the feed dogs.
  5.  If you like, you can hoop the project in a round embroidery hoop for more stability.
  6.  Select a straight stitch and activate the free-motion function, or put the presser foot in the darning­/free-motion position.
  7.  Pull up the bobbin thread and sew a few stitches to secure. Clip the thread ends close to the project and continue sewing.


TIP: Remember, when sewing with the feed dogs lowered, the stitch length is determined by

you. An even, medium-to-fast sewing speed will allow you to sew a more consistent length

of straight stitch. Sewing too slowly may cause small knots to appear on the reverse side of your work.


There are no reviews yet.

Add review

  • Overall satisfaction
  • Quality
  • Value for money
  • Performance
  • Ease of use
Spam protection:

Type or copy & paste the code you see on the left side.

Web design by Brick technology Ltd.